High temperature camera housings cooled with air and water
Water cooled camera housings and air cooled camera housing entirely made in stainless steel suitsble to be used in CCTV systems with high temperature installed near furnaces, rolling mills and high temperature environments
This cooled housing for CCTV cameras was developed to be used in industrial systems when you need to install CCTV
cameras in areas where high temperatures are present as it happens in stainless steel factories.
DIFFERENT VERSIONS OF CCTV CAMERA HOUSINGS
The housings that use for cooling water only have code KUFU.W while the housings that have cone KUFU.WA use both water and air and you can use these housings in systems with higher temperature.
The cooled housings for CCTV cameras are entirely made in stainless steel AISI304 (body, joint and bracket) but, on
request, you can have these cooled CCTV housings in stainless steel AISI316L for areas with corrosive environments.
If you have systems with temperature around 70/80 degree you can use a different housing cooled with air only; this housing is made in aluminium and uses the same front glass system used by the KUFU.WA.
ERMES offer reliable and competitive solutions for all installation where it is necessary to have CCTV cameras cooled with water and/or air in all high temperature environments as it happens near furnaces, rolling mills or similar.
ERMES ELETTRONICA s.r.l. - Via Treviso, 36 - 31020 SAN VENDEMIANO - ITALY