Intercoms over LAN with IP Protocol
The intercoms over LAN with IP protocol are available in different versions suitable to be installed in commercial areas as well as in industrial applications including chemical and marine environments
InterLAN is a family of intercoms over LAN Ethernet with IP protocol that uses VOIP techniques in order to
transfer audio data over data networks.
Each intercom, both ring type and selective type, is IP native and it uses the Ethernet in order to communicate with the
other equipment; these intercoms are able to directly drive the LAN without needing interfaces, management units or
additional central unit of any kind.
Any intercom of the InterLAN family can operate in
selective intercom mode
or in ring intercom mode
simply by varying the programming of the apparatus, however, for the ring operation mode are preferred equipment with handset.
The intercoms are available in several versions that make them suitable to be used inside or outside, in industrial systems or in offices; there are versions made in stainless steel, versions made in die cast aluminum as well as versions with polyester enclosure. Below are the main available versions.
InterLAN-L
It is preferable to use these equipment in selective intercom systems.
They are arranged in a strong stainless steel unit suitable for wall mounting and you can use it inside or outside.
These intercoms over LAN are available in versions with one or four call buttons each of which has a label-holder for the
identification of the place that you can call and it has a signalling led; in addition, on the front panel, you can find
a microphone and a loudspeaker
On the back, you can find two holes for entry of the cables, if necessary, you can use the relevant glands.
InterLAN.4P / 8P
It is preferable to use these equipment in selective intercom systems.
They are arranged in a sturdy enclosure made out in die cast aluminum with protection grids for microphone and loudspeaker;
the enclosures are intended to be installed on wall and they are particularly suitable for use in industrial systems, inside
and outside.
They are available in versions with four or eight call buttons each of which is accompanied by a label-holder that allows
to identify the button and signalling led.
The input cable is made by glands located on the bottom of the device.
The enclosure can also be made in polyester added with fiber-glass that is a material suitable for use in marine environment.
InterLAN.4PC / 8PC
You can use these equipment in selective intercom systems as well as in ring intercom systems.
They are arranged in a sturdy enclosure made out in die cast aluminum with handset for talking with the other users and a
loudspeaker protected by a grid that used to play general and group announcements. They are particularly suitable for use
in industrial systems, inside and outside.
They are available in versions with four or eight call buttons each of which is accompanied by a label-holder that allows
to identify the button and signalling led.
The input cable is made by glands located on the bottom of the device.
The enclosure can also be made in polyester added with fiber-glass that is a material suitable for use in marine environment.
InterLAN.4PCT / 8PCT
You can use these equipment in selective intercom systems as well as in ring intercom systems.
They are arranged in a sturdy enclosure made out in die cast aluminum with handset for talking with the other users; they includes
a 30W power audio amplifier with 100 V line output that can drive external horns or loudspeakers in order to make general and
group announcements. They are particularly suitable for use in industrial systems, inside and outside.
They are available in versions with four or eight call buttons each of which is accompanied by a label-holder that allows
to identify the button and signalling led.
The input cable is made by glands located on the bottom of the device. The enclosure can also be made in polyester added
with fiber-glass or in AISI 316L stainless steel; both materials are suitable for use in marine environment.
InterLAN.16PO
You can use these equipment in selective intercom systems as well as in ring intercom systems.
They are arranged in an enclosure made in ABS that you can install on desk or wall; the talk takes place by means of a
handset and they are suitable to be used in offices or similar places.
They have 16 call buttons each of which has a label-holder that allows to identify the button and a signalling led, moreover
there are three buttons that you can use in order to activate the relays present on the remote intercom.
It come with POE but in systems that do not have this option you can power the unit with an external power supply plug.
InterLAN.PP / InterLAN-L.PP
It is preferable to use these equipment in selective intercom systems and, usually, they have the function of main intercom
in the control rooms.
You can have these intercoms in desk or wall enclosure; both version are entirely made in stailes steel and aluminium and
therefore are suitable for use in industrial environments. The conversation takes place by means of microphone and
loudspeaker.
They have a numeric keypad, function keys and an LCD display for making calls with the aid of an address book that appears
on the display. Also they manage multiple functions among which include the management of call queues, supervision of the
intercom system and the activation of the relays that are present on the intercom which is in communication.
Phone +39 0438 308470 - Fax +39 0438 492340 - email: ermes@ermes-cctv.com
