High temperature camera housings cooled with air and water
Water cooled camera housings and air cooled camera housing entirely made in stainless steel suitable to be used in CCTV systems with high temperature installed near furnaces, rolling mills, glass factory, cement plant and high temperature areas
The housings have two different cooling systems that use water and air respectively, you can have housings with both cooling systems (water and air) or
housings with only water in connection with the real needs. The housings that use for cooling water only have code KUFU.W while the housings that have code KUFU.WA use both water and air and you can use these
housings in systems with higher temperature. The cooled housings for CCTV cameras are entirely made in stainless steel AISI304 (body, joint and bracket) but, on request, you can have these cooled CCTV housings in
stainless steel AISI316L for areas with corrosive environments The housings KUFU.W use grant IP66 protection while the housings KUFU.WA have lower IP degree because use special front flanges that keeps clean and cool the front glass thank the flow of the air that exit from a special slot around it.
If you have systems with temperature around 70/80 degree you can use a different housing cooled with air only; this housing is made in aluminum and uses the same front
glass system used by the KUFU.WA.
|